SBG...FL SBG..SL SBS..SLLinear drive systems typically use screws to transfer rotary into linear movements. This requirement is well achieved by our high efficiency driving products: miniature and large rolled ball screws, ground ball screws as well as different variations of roller screws. The second part of Linear Motion are linear guides and tables. The key know-how here is to find the most suitable guiding solution providing the needed accuracy, stiffness and positioning at the appropriate cost. Previous AGH..SA(CA) AGW..SA(CA) |
Linear guideways provides linear motion by re-circulating rolling elements between a profiled rail and a bearing block. The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and they are able to take loads in all directions.
Linear motion products combine the knowledge and efforts of linear drive systems (ball and roller screws) and linear guides and tables.
Linear drive systems typically use screws to transfer rotary into linear movements. This requirement is well achieved by our high efficiency driving products: miniature and large rolled ball screws, ground ball screws as well as different variations of roller screws.
The second part of Linear Motion are linear guides and tables. The key know-how here is to find the most suitable guiding solution providing the needed accuracy, stiffness and positioning at the appropriate cost.
| select | Inquiry | Type | Mounting Dimensions | Block Dimensions | Rail Size | Max.length Of rail Lomax | Load capacity | Weight | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Height(H) | E | W2 | Width(W) | Length(L) | Mounting tab hole(B×J) | Mounting tab hole(M×L) | L1 | J1 | K | T | Nipple Mounting Hole | Nipple(T1) | Nipple(N) | Width(W1) | Height(H1) | Pitch(F) | Bolt Hole(d×D×h) | G | Dynamic C(kgf) | Sationary Co(kgf) | Stationary moment(kgf.M) MRO | Stationary moment(kgf.M) MPO | Stationary moment(kgf.M) MRO | bearing (kgf) | rail (kgf/M) | ||||
| SBG15FL | 24 | 3 | 16 | 47 | 56.5 | 38*30 | M5*11 | 38.8 | 4.4 | 21 | 7.2 | 3hole | 4.25 | 5.5 | 15 | 15 | 60 | 4.5*7.5*5.3 | 20 | 1600 | 850 | 1370 | 7 | 5 | 5 | 0.12 | 1.5 | ||
| SBG20FL | 30 | 3.6 | 21.5 | 63 | 74 | 53*40 | M6*10 | 50.8 | 5.4 | 26.5 | 9 | M6*0.75 | 4.45 | 12 | 20 | 17.5 | 60 | 6*9.5*8.5 | 20 | 3040 | 1400 | 2420 | 22 | 18 | 18 | 0.3 | 2.16 | ||
| SBG2SFL | 36 | 5.2 | 23.5 | 70 | 83 | 57*45 | M8*16 | 59.5 | 7.25 | 31.5 | 10 | M6*0.75 | 5.95 | 12 | 23 | 21.8 | 60 | 7*ll*9 | 20 | 4480 | 2030 | 3500 | 36 | 32 | 31 | 0.46 | 3.14 | ||
| SBG30FL | 42 | 5.5 | 31 | 90 | 98 | 72*52 | M10*18 | 70.4 | 9.6 | 36.5 | 12 | M6*0.75 | 8.5 | 12 | 28 | 25 | 80 | 9*14*12 | 20 | 4440 | 2855 | 4770 | 50 | 36 | 36 | 0.82 | 4.5 | ||
| SBG35FL | 48 | 7.5 | 33 | 100 | 109.5 | 82*62 | M10*20 | 80.4 | 9.2 | 40.5 | 13 | M6*0.75 | 9.5 | 12 | 34 | 29 | 80 | 9*14*12 | 20 | 4440 | 3800 | 6230 | 96 | 75 | 75 | 1.22 | 6.3 | ||
| SBG45FL | 60 | 8 | 37.5 | 120 | 139 | 100*80 | M12*24 | 98 | 9 | 52 | 15 | PT1/8 | 10.5 | 16 | 45 | 38 | 105 | 14*20*17 | 22.5 | 4450 | 6120 | 9750 | 216 | 170 | 168 | 2.02 | 10.9 | ||
| SBG55FL | 70 | 10.5 | 43.5 | 140 | 163 | 116*95 | M14*28 | 118 | 11.5 | 59.5 | 17 | PT1/8 | 12 | 16 | 53 | 45 | 120 | 16*23.20 | 30 | 4480 | 9020 | 13970 | 367 | 293 | 288 | 4.5 | 14.9 | ||
| SBG65FL | 90 | 17.5 | 53.5 | 170 | 186 | 142*110 | M16*24 | 147 | 18.5 | 72.5 | 23 | PT1/8 | 15 | 16 | 63 | 58.5 | 150 | 18*26*22 | 35 | 4390 | 14380 | 21900 | 629 | 493 | 484 | 6.24 | 21.3 | ||
| SBG15SL | 28 | 3 | 9.5 | 34 | 56.5 | 26*26 | M4*5 | 38.8 | 6.4 | 25 | 6 | 3hole | 8.25 | 5.5 | 15 | 15 | 60 | 45*7.5*5.3 | 20 | 1600 | 840 | 1370 | 7 | 5 | 5 | 0.14 | 1.5 | ||
| SBG20SL | 30 | 3.6 | 12 | 44 | 74 | 32*36 | M5*6 | 50.8 | 7.4 | 26.5 | 8 | M6*0.75 | 4.45 | 12 | 20 | 17.5 | 60 | 6*9.5*8.5 | 20 | 3040 | 1400 | 2420 | 22 | 18 | 18 | 0.36 | 2.16 | ||
| SBG25SL | 40 | 5.2 | 12.5 | 48 | 83 | 35*35 | M6*8 | 59.5 | 12.25 | 35.5 | 8 | M6*0.75 | 9.95 | 12 | 23 | 21.8 | 60 | 7*11*9 | 20 | 4480 | 2020 | 3500 | 36 | 32 | 31 | 0.44 | 3.14 | ||
| SBG30SL | 45 | 5.5 | 16 | 60 | 98 | 40*40 | M8*l0 | 70.4 | 15.2 | 39.5 | 8 | M6*0.75 | 11.5 | 12 | 28 | 25 | 80 | 9*14*12 | 20 | 4440 | 2360 | 3970 | 50 | 36 | 36 | 0.72 | 4.5 | ||
| SBG35SL | 55 | 7.5 | 18 | 70 | 109.5 | 50*50 | M8*l2 | 80.4 | 15.2 | 47.5 | 10 | M6*0.75 | 16.5 | 12 | 34 | 29 | 80 | 9*14*12 | 20 | 4440 | 3800 | 6230 | 96 | 75 | 73 | 1.14 | 6.3 | ||
| SBG45SL | 70 | 8 | 20.5 | 86 | 139 | 60*60 | M10*17 | 98 | 19 | 62 | 15 | PT1/8 | 20.5 | 16 | 45 | 38 | 105 | 14*20*17 | 22.5 | 4450 | 6120 | 9750 | 216 | 170 | 168 | 2 | 10.9 | ||
| SBG55SL | 80 | 10.5 | 23.5 | 100 | 163 | 75*75 | M12*l8 | 118 | 21.5 | 69.5 | 18 | PT1/8 | 22 | 16 | 53 | 45 | 120 | 16*23*20 | 30 | 4480 | 9020 | 13970 | 367 | 293 | 288 | 4.2 | 14.9 | ||
| SBG65SL | 90 | 17.5 | 31.5 | 126 | 186 | 76*70 | M16*20 | 147 | 38.5 | 72.5 | 23 | PT1/8 | 15 | 16 | 63 | 58.5 | 150 | 18*26*22 | 35 | 4390 | 14380 | 21900 | 629 | 495 | 484 | 6.15 | 21.3 | ||
E-mail:Sunny@npg-industries.com
Tel:+86-15051683850
Whatsapp:+86-15051683850
Add: 311A,QuanQiuTong Building,No#18 JinGang Road,ZhangJiaGang Bonded Zone,SuZhou,JiangSu,China.215600
Original Source,23 Years Supplier,Favourable Price,Stable Quality & Fast Delivery
